Monday, December 19, 2016

configure frame relay on packet tracer

*** network diagram


1- configuration on frame-relay switch

2- cisco router configuration
- hq
interface Serial2/0
 ip address 192.168.1.1 255.255.255.0
 encapsulation frame-relay
 frame-relay interface-dlci 202
 clock rate 64000


-br1
interface Serial2/0
 ip address 192.168.1.2 255.255.255.0
 encapsulation frame-relay
 frame-relay interface-dlci 101
 clock rate 64000


-br2
interface Serial2/0
 ip address 192.168.1.3 255.255.255.0
 encapsulation frame-relay
 frame-relay interface-dlci 102
 clock rate 64000


3- testing
- on hq how we should be the map to both branch routers

cisco# show frame-relay map 
Serial2/0 (up): ip 192.168.1.2 dlci 202, dynamic, broadcast, CISCO, status defined, active
Serial2/0 (up): ip 192.168.1.3 dlci 201, dynamic, broadcast, CISCO, status defined, active


- on branch, there is only one map
cisco# show frame-relay map 
Serial2/0 (up): ip 192.168.1.1 dlci 102, dynamic, broadcast, CISCO, status defined, active


No comments:

Post a Comment