Thursday, February 22, 2018

how to configure atm on cisco

**** diagram

r1 -------> atm switch <-------r2

- os version and router serie
Cisco IOS Software, 7200 Software (C7200-JK9S-M), Version 12.4(13b), RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Wed 25-Apr-07 03:18 by prod_rel_team


ROM: ROMMON Emulation Microcode
BOOTLDR: 7200 Software (C7200-JK9S-M), Version 12.4(13b), RELEASE SOFTWARE (fc3)


1- on atm switch

- the mapping
port:vdi:vci                  port:vdi:vci
1:0:100                        10:0:200


so we mapping port 1 to port 10 using vdi 0 and one router use vci 100 and other uses vci 200.


-2- router r1 configuration file
interface FastEthernet0/0
 no ip address
 shutdown
 duplex half
!
interface ATM1/0
 no ip address
 no atm ilmi-keepalive
!
interface ATM1/0.100 point-to-point
 ip address 1.1.1.1 255.255.255.0
 no snmp trap link-status
 pvc 0 0/100
 !

!

3- router r2 configuration
interface FastEthernet0/0
 no ip address
 shutdown
 duplex half
!
interface ATM1/0
 no ip address
 no atm ilmi-keepalive
!
interface ATM1/0.200 point-to-point
 ip address 1.1.1.2 255.255.255.0
 no snmp trap link-status
 pvc 0 0/200
 !

!

No comments:

Post a Comment